In many cases, you will need to boot the BIOS Heaven when you first build your PC before you want to change some of your ringtone settings or troubleshoot a problem. Why
This is not practical if your system is down. Why not enter the BIOS, and sometimes evenWorse, to the operating system.
Read on to find out why your computer won’t work or the BIOS or OS won’t load and how to fix it.
How To Fix PC Won’t Boot Into BIOS
How do I fix the BIOS on my computer?
Turn off the device and restart it.
Boot into the BIOS or possibly the UEFI firmware installer.
Change the SATA setting to the correct value.
Save the configuration and restart your computer.
When prompted, select Start Windows normally.
1. Use UEFI Firmware Settings
If you have a Windows 10 operating console, sharing the BIOS through UEFI firmware settings is probably the best method, as long as your laptop boots the operating system correctly but doesn’t give you access to the BIOS.
- Open the Settings app and select the current update and security zone.
- Select the Restore From tab in the left pane and click the Restart Now button under Advanced Startup with your mouse.
- If I said Windows is a new version and parsed the “Choose an option” heading, click the “Troubleshoot” button.
- Next, select Advanced Options, and then select UEFI Firmware Settings.
- Now press the reset button and the circuit will be loaded into the BIOS.
2. Repair The Bad Electrical Connection
If the connector is poweredIf the motherboard or processor is connected completely incorrectly or incorrectly, you will not be able to boot into the BIOS.
There is a 24-pin connector on the motherboard, so make sure it is secure and there are no signs of damage to the connector itself.
The processor usually has an eight-pin connector in a 4+4 shape.
Check the other useful ends of the cables included with the power supply to make sure it’s properly connected.
3. Joystick Troubleshooting
A RAM error can cause your personal computer to hang while loading the BIOS or operating system.
You need to make sure the memory cards are stable and properly installed.
Open the Plus case and locate the RAM sticks on the motherboard.
Remove them all from the slots, then reinsert one at a time.
When installing each RAM module, you should usually align the notch in the RAM with the notch in the slot.
If you use the racket correctly, the lugs on both sides should make a percussive sound.
If this still doesn’t work, take all the RAM sticks andinsert only one from the entire group.
When the system boots up, tweak the other RAM sticks one by one until you find the failed flash drive you want to replace.
Sometimes remember that a slot gets damaged before the motherboard, and buyers have to try different slots to finally get the result.
4. Clear BIOS To Reset CMOS
Because problems with the CMOS can cause boot problems, you may need to completely clear the CMOS by removing the battery.
- Turn off and disconnect any peripherals connected to the computer via USB, HDMI, or other ports.
- Disconnect the computer from the power source and open the case.
- On the motherboard, find a coin-shaped coin cell that looks like a watch battery. If you can’t find it, check your motherboard manual to find out where it is.
- Now we need to move the battery a little. It can be held in place with a clamp or lever. Can you remove the lock with your hand or foot or with a screwdriver and then take out the battery? ulator.
- Leave the battery outside for about 20 minutes and then just put it back in. Make sure it’s in place.
- Close the case, reconnect the connector and start the PC. Note that the CMOS battery life can be around ten years. If you have owned the motherboard for such a long time, or are using a used motherboard, you can assume that the battery may be dead. Buy a new CMOS battery, remove it and try again to fix the problem.
How To Start A Windows Computer
For those who managed to get into the BIOS but still can’t boot the OS, follow this troubleshooting process.
1. Disconnect External Devices
Windows may show startup symptoms due to a conflict with one of the connected devices or their drivers.
How do you fix a computer that won’t boot up?
Give him more power. (Photo: Zlata Ivleva)
Check your monitor. (Photo: Zlata Ivleva)
Listen for the beep. (Photo: Michael Custer)
Disconnect unnecessary USB devices.
Reinstall the hardware inside.
Scan for viruses using a specific Live CD.
Boot into safe mode.
You will need to restart your computer and see if the operating system will start if you need to disable them all.
Can you fix a corrupted BIOS?
According to users, you might be able to fix the corrupted BIOS problem simply by removing the battery from the motherboard. Removing the battery will reset your trusty BIOS to its default settings and hopefully you can get rid of the problem.
Turn off your computer and disconnect all USB devices, including rodent, externalhard drive, etc.
Only the power cables, Keep display cable, and keyboard should be connected to the computer.
Press the power switch several times to discharge most of the remaining electricity.
Then turn on the system, and when Windows starts, you have identified the problem.
Connect each tool one by one and restart the program until you find the worst one.
2. Reading BIOS Messages
When the system is unable to complete the running shoe process, it will often give you an error message or beep to help you determine where the nightmare is.
Either read the behavior of the error message on the screen, or use the beeps on startup and just look at the value.
You can check your computer or maybe even your motherboard manual or manufacturer’s website for details while browsing.
If you don’t see or notice anything, keep scrolling through the list to find the problem.
3. Troubleshooting Possible Boot Device Issues
If your PC boots up when you need the BIOS and that annoying OS isn’t working, there might be something wrong with the drive that Windows is installed on or with the swipe command.
The boot order is the method by which the system determines which memory settings to scan for Windows to boot.
The attractiveness of the job should be reasonably higher in the mainline order.
- Remove the flash drives and external storage and reboot the system.
- Enter the BIOS as described in the last paragraphs during startup.
- Look for the BIOS boot section on memory support. It might be called “Load Order Menu”, “Load Priority” or something similar.
- Place the primary drive that contains the operating system at the top of the list. If you don’t know which drive the operating system is on, disable all but one and boot the system. Continue browsing the list until you find the desired drive. Set a priority for it, and then enable all other drives.
- Don’t forget to save from Change the general BIOS and exit.
Please note that the BIOS may not recognize the disk type of the operating system at all and not program it in the list.
Check the cable connected to the drive and make sure it is connected properly.
If you have an operating system on an M.2 SSD, make sure it’s installed correctly.
If you are afraid of damaging the disk, you will have to check everything on another working computer.
4. Update BIOS
Updating the BIOS can help resolve boot issues, especially if you’re building your own PC or just installed an old motherboard.
Rebooting the firmware may resolve issues caused by new mated hardware if you have an older motherboard.
The update process varies by manufacturer, so be sure to check your motherboard manual or trusted website for instructions on how to complete this procedure.